[Scribus] PDF/X-3 Option 'Disabled'

[Maciej Hanski]

On Sun, 08 May 2005 16:28:44 -0400
Louis Desjardins <louisdesjardins at videotron.ca> wrote:

> Hi again,
> 
> Just want to go over the basics.
> 
> 1. As a very first step, you need to make sure littlecms is 
> installed. You can check this in the About Scribus menu where you'll 
> note the compilation date. There are capital letters following the 
> date. One of them stands for littlecms and tooltips are there to 
> assist. If this is not the case, nothing else will be of any use. How 
> to install this properly is beyond me. But I know docs.scribus.net 
> must be pretty clear. :)
> 
> 2. Then, as bostjan points out, you need ICC profiles, both CMYK and 
> RGB in the same directory. You have to tell Scribus where to locate 
> this directory.
> 
> 3. Only then will you be able to activate Color Management (from my 
> previous post).
> 
> 4. Then, you will have access to PDF/X-3.
> 

Wiki is your best friend:

http://wiki.scribus.net/index.php/Getting_and_installing_ICC_profiles

cheers
Maciej