[Scribus] How to print?

[BandiPat]

avox wrote:
[...]
> Can your switch on the "debug" mode in the LogLevel directive for your CUPS
> daemon?
> Edit /etc/cups/cupsd.conf (or wherever this configuration file is installed
> in your case) to have the line "LogLevel debug" there. Then restart your
> CUPS daemon /etc/software/init.d/cups start (the command may be customized
> by your Linux distribution).
> 
> 
> 
>> It seems it's sending the job or a job to CUPS successfully, but what's 
>> it is sending appears to be blank, thus the blank pages?  Although it 
>> does seem that the tmp.ps file is intact and the correct job/page. 
>> Hopefully that will be helpful to you.  I'll test more later, but right 
>> now, I don't seem to be getting any errors showing up in the logs and 
>> that may be because there are none. 

> -----------------
Ok, Andreas, here is your debug from CUPS.  Again, I could see no errors 
in the log.  The below pasted text is the last thing posted after 
printing from Scibus in the log file.  Notice it mentions only 203 total 
bytes of data then 34 bytes later?  It doesn't seem to be getting any 
data to print from Scribus is my guess.  I also did a printout from 
kmail before to see what differences there might be in the log, then I 
removed the log file to let Scribus create a new one.  The only 
difference I saw was the text listed below.  That was not included with 
the kmail printout, otherwise they were identical.  Don't know if that 
helps you or not.  So it seems CUPS & Gutenprint are doing their jobs 
ok, to me at least.

Pat


D [05/Jun/2007:14:10:48 -0400] [Job 89] Gutenprint ending job
D [05/Jun/2007:14:10:48 -0400] Discarding unused printer-state-changed 
event...
D [05/Jun/2007:14:10:48 -0400] [Job 89] Gutenprint printed total 203 bytes
D [05/Jun/2007:14:10:48 -0400] [Job 89] Gutenprint used 0.790 seconds 
user, 0.040 seconds system, 3.104 seconds elapsed
D [05/Jun/2007:14:10:48 -0400] Discarding unused printer-state-changed 
event...
D [05/Jun/2007:14:10:48 -0400] [Job 89] Read 34 bytes of print data...
D [05/Jun/2007:14:10:48 -0400] PID 2187 
(/usr/lib/cups/filter/rastertogutenprint.5.1) exited with no errors.
D [05/Jun/2007:14:10:48 -0400] PID 2186 
(/usr/lib/cups/filter/pstoraster) exited with no errors.
D [05/Jun/2007:14:10:48 -0400] [Job 89] Wrote 34 bytes of print data...
D [05/Jun/2007:14:10:48 -0400] PID 2188 (/usr/lib/cups/backend/usb) 
exited with no errors.
D [05/Jun/2007:14:10:48 -0400] [Job 89] File 0 is complete.
D [05/Jun/2007:14:10:48 -0400] Discarding unused printer-state-changed 
event...
D [05/Jun/2007:14:10:48 -0400] Discarding unused job-completed event...
D [05/Jun/2007:14:10:49 -0400] Unloading job 89...
D [05/Jun/2007:14:11:04 -0400] cupsdCloseClient: 11



-- 
        ---Zenwalk v4.6--Linux 2.6.21---
         Registered Linux User #225206
     "Life's a garden, Dig It!"  --Joe Dirt