[scribus] Image moving with text

[Jean-Paul Gendner]

Hi,
	Many thanks for these examples. I think it is better to avoid
inserting a newline, because if there are changes in the document it may
then be bad placed. 
	As already said, if there are only a few inline objects it is not a
problem. The problem is the time needed if there are many.

	Ideally the properties of an inline object should include specific
parameters like:
- use real object width Yes/no;
- use real object height Yes/no (at present time, the width of the object is
always used, never the height);
- Vertical offset in mm.
	These properties should then be accessible after placing the object
in a text frame.
	This would be great.

	Regards,
	Jean-Paul

****************
Jean-Paul Gendner
Site : f5bu.fr
03.88.27.03.44

-----Message d'origine-----
De : Gregory Pittman [mailto:gpittman at iglou.com] 
Envoyé : samedi 21 juin 2014 00:58
À : Scribus User Mailing List
Objet : Re: [scribus] Image moving with text

On 06/20/2014 04:30 PM, Jean-Paul Gendner wrote:
> Hello,
>
>       Wonderful! Thank you very much. I just made a big step. (I tried to
> copy an ImageBox after entering in the text frame by Ctrl-T, and in this
> case, I copied the xml code!)
>
>       So, this is a perfect solution to enter an equation between two
> paragraphs.
>       However, how may I do to enter an equation inside a paragraph,
taking
> into account that the equation needs to reserve space above and below the
> current line?
>
>       To better see what I mean, you may download a small file
representing a
> simple example at:
> https://dl.dropboxusercontent.com/u/49636799/Equations.jpg
>       For a better understanding, I have put the text in blue, and what
are
> black are equations. For the 7th line, beginning by "exemple", the space
> above and below the line is larger as for a normal text line. How my I
> specify this? For the upper space, I have tried, without success, to put a
> dummy big text behind the imagebox? I also do not see how I may center the
> ImageBox vertically to the current line?
>
Here is an attempt (two attempts really) to do this natively in Scribus:

http://www.infoisfree.com/Public/equationtext.png

Both of these are made by superimposing Render frames with a LaTeX 
equation* on top of the underlying text frame, then setting text to flow 
around the render frames.
On the top I didn't bother to fiddle with linespacing.
In the bottom example, I fudged things by making a newline after "Par", 
then adjusting its linespacing to get the subsequent line where I wanted 
it to be.

So potentially there is a lot of fiddling involved, but maybe only if 
and when you want there to be.

Greg

* this is really rather messy in LaTeX:

$\bf{U_{eff} = \frac{U_{Cr\hat{e}te}}{\sqrt{2}} = 
\frac{U_{Cr\hat{e}te-Cr\hat{e}te}}{2\cdot\sqrt{2}}}$



___
Scribus Mailing List: scribus at lists.scribus.net
Edit your options or unsubscribe:
http://lists.scribus.net/mailman/listinfo/scribus
See also:
http://wiki.scribus.net
http://forums.scribus.net